[Important Security Notice] Fake Qfinder Pro Websites Detected. Learn more >

FAQ

Why am I unable to expand the capacity of a RAID 10 group on a TS-x31 or TS-269H series NAS?

Last modified date: 2017-09-25

TS-x31, TS-x31C, TS-x31U, TS-269H

The following NAS series: TS-x31, TS-x31C, TS-x31U, TS-269H, do not support expanding RAID 10 groups by replacing disks one by one or by adding new disks. This is a limitation of Linux kernel 3.2 which is installed on these NAS.

Instead of expanding a RAID 10 group, you can use any empty drive bays or an expansion unit to add new disks, and then create a new storage pool or single static volume.

Was this article helpful?

Yes. No.

40% of people think it helps.

For further assistance, ask other users and QNAP experts in the community. Go to QNAP Community

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.