QNAP Systems, Inc. - Network Attached Storage (NAS)



I forgot my Turbo NAS password! What can I do?

Applied Models:


Please press the reset button for 3 seconds, then a beep sound will be heard. The following settings will be reset to default:

  • System administration password: admin.
  • TCP/IP configuration: Obtain IP address settings automatically via DHCP.
  • TCP/IP configuration: Disable Jumbo Frame.
  • TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port trunking mode will be reset to "Active Backup (Failover)".
  • System port: 8080 (system service port).
  • Security level: Low (Allow all connections).
  • LCD panel password: (blank); This feature is only provided by the NAS models with LCD panels. Please visit www.qnap.com for details.
  • VLAN will be disabled.
  • Service binding: All NAS services run on all available network interfaces.

This reset function only affect above settings. Your data will be left intact.

Please check the following for more detail: http://docs.qnap.com/nas/4.1/Home/en/index.html?hardware.htm

Release date: 2013-04-19
Was it helpful?
Thank you for your feedback.
Thank you for your feedback. If you have any question, please contact support@qnap.com
55% of people think it helps.