Frequently asked questions about PoE function on QSW Switch
Applicable Products:
- QSW Switch
1. Can I connect non PoE devices to PoE switch? Will it damage non PoE device?
If your PoE switch follows PoE standard, the switch will auto-detect if the connected devices support PoE standard. If non PoE devices connected, PoE switch will only have network connection without supplying power.
2. The power consumption of my PDs is lower than the maximum power of the PoE port. Will it damage my PDs?
No, it won’t. Before PoE switch supply any power to a device, it will have a handshake procedure that provide how much power the connected device requires. This procedure takes low voltage and is harmless to any connected devices no matter PoE or non PoE devices. This is built-in features of all IEEE 802.3af/at/bt-compliant devices to make PoE safe.
3. Can I connect one PoE switch to another PoE switch?
Yes, you can do it. Connect 2 PoE switches, both PoE switches will only have network connection without supplying power. PoE switches will only supply power while detecting PDs (powered devices).
4. Can I use CCA(Cu/Al) Cable?
Copper-Clad Aluminum (CCA) cable uses an aluminum core and is coated with copper. Aluminum is not a good electrical conductor compared to copper. Higher DC-resistance value of aluminum means more power lost and dissipated as heat.
In this case, CCA cable provide morse capability to supply the power for PoE applications. So we do not recommend to use CCA cables with PoE switches.
Suggestion: Using 100% cooper ethernet cables for your PoE applications.
5. The distance between PoE switches and PD is over 100meters. What can I do to expend the distance over 100 meters?
You can add PoE extender (also called PoE repeater) between PoE switches and PD.
Still need help?
Post your question in QNAP Community. QNAP staff and experienced users will reply.