Indholdet er maskineoversat. Se Ansvarsfraskrivelse for maskinoversættelse.

How to restart the Network Neighborhood (SMB/CIFS) service on the NAS

Sådan genstarter du Network Neighborhood (SMB/CIFS)-tjenesten på NAS'en

Last modified date: 2025-08-21

Applicable Products

NAS devices (QTS, QuTS hero)

Scenario

When you need to restart the SMB/CIFS service without rebooting the entire NAS, or after updating/applying file access permissions and you want them to take effect immediately, you can quickly restart the service using this method.

Solution

Note: Restarting the SMB service will interrupt any ongoing file transfers over network shares. Please notify users in advance.

Method 1: Via the Management Interface

Sign in to the QTS or QuTS hero administration page.
Go to Control Panel → Network & File Service → Win/Mac/NFS/WebDAV → Microsoft Networking (SMB)
Uncheck the option Enable file service for Microsoft Networking (SMB) and click Apply.
Check the option Enable file service for Microsoft Networking (SMB) again, and fill in the server description and workgroup.
Server Description: NAS Server
Workgroup: WORKGROUP
Click Apply.
Wait for the service to restart (usually 10–30 seconds).
Verify that clients can reconnect and see the updated permissions.

Method 2: Using SSH

If you are comfortable with the command line, log in to the NAS via SSH and run the following command to restart the SMB service:

/etc/init.d/smb.sh restart

Windows Client: Release and Reconnect Network Drives

Check existing connections:
```
net use
```
Disconnect a specific drive (example Z:):
```
net use Z: /delete
```
Disconnect all connections:
```
net use * /delete
```

Reconnect to the shared folder (example):

net use Z: \\192.168.1.100\Public /user:admin admin123

Gældende produkter

NAS-enheder (QTS, QuTS hero)

Scenario

Når du har brug for atgenstarte SMB/CIFS-tjenestenuden at genstarte hele NAS'en, eller efteropdatering/anvendelse af filadgangstilladelserog du ønsker, at de skal træde i kraft med det samme, kan du hurtigt genstarte tjenesten ved hjælp af denne metode.

Løsning

Bemærk:Genstart af SMB-tjenesten vil afbryde igangværende filoverførsler over netværksdeling. Venligst informér brugerne på forhånd.

Metode 1: Via administrationsgrænsefladen

Log ind på QTS eller QuTS hero administrationssiden.
Gå tilKontrolpanel → Netværk & filservice → Win/Mac/NFS/WebDAV → Microsoft Netværk (SMB)
Fjern markeringen af muligheden Aktiver filservice for Microsoft Netværk (SMB) og klik på Anvend.
Marker muligheden Aktiver filservice for Microsoft Netværk (SMB) igen, og udfyld serverbeskrivelsen og arbejdsgruppen.
Serverbeskrivelse: NAS-server
Arbejdsgruppe: WORKGROUP
Klik på Anvend.
Vent på, at tjenesten genstarter (normalt 10–30 sekunder).
Bekræft, at klienter kan genoprette forbindelse og se de opdaterede tilladelser.

Metode 2: Brug af SSH

Hvis du er fortrolig med kommandolinjen, log ind på NAS'en via SSH og kør følgende kommando for at genstarte SMB-tjenesten:

/etc/init.d/smb.sh restart

Windows-klient: Frigiv og genopret netværksdrev

Tjek eksisterende forbindelser:
```
net use
```
Afbryd et specifikt drev (eksempel Z:):
```
net use Z: /delete
```
Afbryd alle forbindelser:
```
net use * /delete
```

Genopret forbindelse til den delte mappe (eksempel):

net use Z: \\192.168.1.100\Public /user:admin admin123

Was this article helpful?

Yes. No.

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

Lager

Netværk

Udvidelsestilbehør

Overvågning

NAS

Netværk

Overvågning

Applicable Products

Scenario

Solution

Gældende produkter

Scenario

Løsning

Choose Your Country or Region

Asia

Europe

America

Global