QDA-A2AR Specification

  1. Use two 2.5-inch SATA drives in a single 3.5-inch SATA drive bay with RAID support for PC and NAS

    Standard Warranty 1 year
    Supported Drives 2 x 2.5" SATA 6Gbps HDD/SSD (up to 9.5 mm in height)
    Hostitelské rozhraní SATA 6Gbps
    Podporované operační systémy 1. QTS 4.4.1 (or later)
    2. Windows: Windows 7, 8.1, 10, Windows Server 2012 R2
    3. Ubuntu
    Dimensions (L x W x H) 138,2 × 101,6 × 25,9 mm
    Hmotnost 0.15 kg
    Podpora RAID RAID 0, 1
    Poznámka The connected drive may not reach its optimal performance due to protocol translation and some overhead.

    All the drive data will be cleared upon drive initialization or RAID mode switching with the QDA-A2AR. Ensure that all data is backed up beforehand.

    Window and Linux PC supports all four modes mentioned above. QTS does not support Individual mode.

    It is recommended that only drives with identical model numbers and capacities are used to create a RAID 0/1 group because the total storage space will be equal to the size of the smallest drive.

    The SATA controller of the PC must support port multipliers to recognize two drives in the Individual mode configuration. Consult your system provider and install the latest drivers for your SATA controller.

    Installing a QNAP disk adapter in another QNAP disk adapter is not supported. (e.g. QDA-A2MAR cannot be installed in the QDA-A2AR.)

    TR-002/TR-004 RAID expansion enclosures do not support QDA-A2AR/QDA-A2MAR.

    QTS identifies the drives in a QDA-A2AR as a single volume. Installing two drives with a RAID 1 configuration for QDA-A2AR is required to use Qtier. If a QDA-A2AR drive fails and needs replaced: you must disable Qtier to make the QDA-A2AR drive data move to the NAS-based storage pool, and then replace the failed QDA-A2AR drive.
    Schéma architektury architecture_diagram_raid_support
    Poznámka: Společnost QNAP si vyhrazuje právo vyměnit díly nebo příslušenství, pokud již není k dispozici originál od výrobce/dodavatele. Jakákoli náhrada bude plně otestována a ověřena, aby splňovala přísné zásady kompatibility a stability, a bude poskytovat identický výkon jako originál.
    Obrázky produktu jsou pouze ilustrační a mohou se lišit od skutečného produktu. V důsledku rozdílů v monitorech se mohou lišit i barvy produktu od těch, které jsou zobrazeny na webových stránkách.
    Design a specifikace se mohou změnit bez předchozího upozornění.
Minimum operating system requirements
  1. QNAP NAS: QTS 4.4.1 and later
  2. Windows: Windows 7 and later, Windows Server 2012 R2 and later
  3. Linux
Software Utility Features
  1. QNAP External RAID Manager
    • Overview device, disks, and RAID info and status
    • Support for disk’s S.M.A.R.T. monitoring
    • Desktop notification to inform abnormal status
    • RAID rebuild
    • RAID recovery
    • Firmware update
    • Notification for new version of firmware and application
    • System event logs for troubleshooting
    • Export event logs to .csv file

Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity.

Show more...
QDA-A2AR

QDA-A2AR

Flat head screw x8 (for 2.5” HDD/SSD)

Flat head screw x8 (for 2.5” HDD/SSD)

RAID Switch Tool

RAID Switch Tool

Quick Installation Guide (QIG)

Quick Installation Guide (QIG)

Dokoupitelné vybavení

Na dodávané příslušenství společně s produktem, jako jsou rozšiřující karty, napájecí adaptér a příslušenství, se vztahuje jednoroční záruka.

Zvolte specifikaci

      Zobrazit více Zobrazit méně

      Tato stránka v jiných zemích / oblastech:

      open menu
      back to top