QNAP Systems, Inc. - Network Attached Storage (NAS)

Language

Support

When unplugging a hard disk (HDD) from the Turbo NAS, the NAS will freeze.

Applied Models:

Answer:

Cause:
This is a QTS design limitation. When QTS is initiated, it sets a SWAP partition in the Turbo NAS HDD. It means that removing a HDD will cause unpredictable system behavior, including freezing and crashes.

Solution:
If your Turbo NAS is set to RAID 1, RAID 5 or higher, it can tolerate the removal of a single HDD. But if your Turbo NAS only has a single HDD or is set to RAID 0 or JBOD, you will encounter system freezing or crashes and the only way to recover is by reinserting the HDD and restarting the Turbo NAS.

Datum vydání: 2014-05-12
Bylo to pro vás to užitečné?
Děkujeme vám za vaši zpětnou vazbu.
Děkujeme vám za vaši zpětnou vazbu. Máte-li nějaké dotazy, kontaktujte prosím adresu support@qnap.com
67% lidí si myslí, že to pomáhá.