Products
TS-EC1679U-RP
TS-EC1679U-RP
Ultra-high performance 16-bay NAS server with ECC memory for SMBs
Compare
Features
Hardware Spec.
Software Spec.
Package Contents
Compatibility
Gallery
Datasheet
Download
CPU Quad Core Intel® Xeon® E3-1225 v2 Processor 3.2 GHz
Memory System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)

Note:
  1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
  2. For the information of RAM module installation and compatible NAS models, please refer to the  QNAP RAM Module Installation Guide
Flash Memory 512MB DOM
Hard Drive 16 x 3.5" or 2.5" SATA 6Gb/s, SATA 3Gb/s hard drive or SSD

Note:
1. The standard system is shipped without hard drives.
Hard Drive Tray 16 x hot-swappable and lockable tray
LAN Port 4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED Indicators Status, 10 GbE, LAN, eSATA, hard drives
USB 2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
eSATA 2 (rear)
Buttons System: Power button and reset button
Alarm Buzzer System warning
Form Factor 3U, Rackmount
Dimensions 130(H) x 442.4(W) x 528.3(D) mm
5.12(H) x 17.42(W) x 20.80(D) inch
Weight Net weight (NAS only) : 20.21 kg/ 44.56 lb
Gross weight (with packing and accessories) : 23.72 kg/52.29 lb
Sound Level (dB) Standby: 54.73dB
In operation: 55.13 dB
(with16 x 1TB HDD installed)
Power Consumption (W) Sleep mode: 89.1 W
In Operation: 229 W
(with 16 x 1TB hard drive installed)
Temperature 0~40˚C
Humidity 5~95% RH non-condensing, wet bulb: 27˚C
Power Supply Input: 100-240V AC,50-60Hz
Output: 600W
Expansion Slot 2 (for network and storage expansion)
VGA Reserved for maintenance
HDMI Reserved for maintenance
Fan 3 x 6 cm smart cooling fan

Remark:
The TS-x79 rack mount models comply with ANSI/EIA-RS-310-D rack mounting standards. Before purchasing the server racks for these models, please make sure the server racks conform to the following criteria:
  1. Rack size

      A. Mounting post width: ≥ 450mm

      B . Panel width: ≥ 485mm

      C. Mounting post depth: 650mm~850mm

  2. If the NAS is to be installed in a rack, a rack shelf or QNAP rail kit (optional purchase) is required.
  3. The optional rack kits for the TS-x79 rack mount models are only compatible with square-hole server racks.