QNAP Systems, Inc. ( Download Center ) - Quality Network Appliance Provider

Download

NAS User Manual

FAQ

Customer Service

Online Support Form

Warranty Terms and Conditions

Warranty FAQ

How To Upgrade Firmware?

How to Check Your Firmware Version?



	Support (English and Chinese only)


	Support, Service Hours: 09:30~ 24:00 (GMT + 8, Mon. - Fri.)

Home > Download Center

Product Line

Model Name

　Model: TS-219 Turbo NAS

Firmware

Update date

2010/08/25

Version

3.3.2 Build0819

Release Notes

[Before Getting Started]

- You are strongly recommended to back up all the data before applying this update.

- If you found the UI incomplete or incorrect, please clear the browser's cache and then refresh the current page.

[Version & Build]

v3.3.2 Build0819

[Checksum]

TS-219/219P: 2600700589

[What's New?]

- Supports AD trusted domain

[Enhancements]

- [Time Machine Support] The capacity can be set to 0 for unlimited use by Time Machine.

- DNS status checking in "Applications" > "QPKG Plugins".

[Major Bug Fixes]

- [External Device] If an external drive is formatted as HFS+ file system by Mac, some files (e.g. MP4) that are copied from Mac to the NAS via the external drive cannot be played properly.

- [SNMP] Wrong information in MIB.

- [Live Update] Wrong display of download percentage.

- [Windows AD] Domain users should not be able to login the NAS via AFP by the AD server display name.

- [Windows AD] Domain users cannot login the NAS via AFP, FTP, and Web File Manager if the user name contains space.

- [Virtual Disk Drive] Authentication failure when CHAP information contains special characters.

- The USB drive cannot be mounted when it uses GPT partition.

- Hard disk drive S.M.A.R.T. full test failure when the hard disk drive(s) enter standby mode.

- System crash occurs when using vRanger to back up VM via SAMBA.

- Only one USB drive can be mounted after reboot when multiple USB devices are connected to NAS.

- The LUN cannot be re-mapped after being unmapped.

- Disconnection issue when transferring files from Mac to the NAS via wireless connection (SAMBA & AFP).

[Known Issues]

- [Surveillance Station] Y-CAM Generic V2 will be disconnected when selecting the channel in Live View page.

File Size

95.97MB

Download from

Download
Please read the release notes carefully to make sure you need to upgrade the firmware. Before upgrading system firmware, back up all disk data on the server to avoid any potential data loss during system update. QNAP disclaims any responsibility for all sorts of data loss and recovery.

Firmware

Update date

2010/07/21

Version

3.3.1 Build0720

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]

v3.3.1 Build0720

[Checksum]

TS-219/219P: 430143760

[What's New?]

- Support system migration on all NAS models (Applied model: TS-x10/x19/x39/x59/509/809)

[Enhancements]

- Hide the system hidden files (e.g. /.AppleDB /.AppleDouble) in Web File Manager

- Update the SMS message format as "[ServerName] message".

[Major Bug Fixes]

- [Network Services] NFS cannot be mounted via UDP protocol when port trunking mode is enabled.

- [Network Services] Incorrect file and folder permission of AFP access to the NAS.

- [External Device] Support for APC Smart UPS 1500.

- [Network Services] SNMP cannot get the value of the hard disk drives.

- [Multimedia Station] Web publish link is invalid in the HTTPS connection.

- [Multimedia Station] Failure in sending email with pictures.

- [Network Services] Samba service cannot be activated if the disk volume is in Degraded/ Read-Only mode.

- [Applications] The "root" password of MySQL server cannot be reset.

- [Disk Management] Some targets/LUNs will become unavailable in VMware environment if the system reaches the maximum amount of targets and LUNs.

- [Disk Management] iSCSI LUNs cannot be remounted automatically after performing the volume check.

- [Disk Management] Incorrect LUN information on remain capacity when the free size is less than 1 GB.

- [System Administration] DNS server cannot resolve the Domain Name with IPv6 setting.

- [System Migration] The web administration port will be restored to default value (8080) after system migration.

- [Applications] Incorrect system log when enabling iTunes service with blank password.

- [System Administration] Missing default gateway setting after changing the network mode from port trunking to standalone.

- [System Administration] Incorrect certificate file when exporting/ downloading the file from the NAS.

[Known Issues]

- (Surveillance Station) Y-CAM Generic V2 will be disconnected if selecting the channel in Live View page.

- [External Device] If the external drive is formatted to HFS+ file system by Mac, files (e.g. MP4) that are copied from Mac to NAS via the external drive cannot be played properly.

File Size

94.29MB

Download from

Firmware

Update date

2010/06/23

Version

3.2.8 Build0618

Release Notes

[Before Getting Started]
- It's highly suggested that you should back up all the data before applying this update.
- If you cannot login via web administration or found the UI is incomplete/incorrect,
please try to clear the browser's cache first and then refresh current page.

[Version & Build]
v3.2.8 Build0618

[Checksum]
TS-219/219P: 3563192250

[What's New?]
- Twonky UPnP/DLNA Server 5.1.6

[Enhancements]
- N/A

[Major Bug Fixes]
- Fixed: Finder cannot find NAS if the NAS is directly connected to a computer during the first-time installation
- Fixed: failed remote replication or synchronized backup when Jumbo Frame is enabled during large data transfer
- Fixed: [UPnP] Large files (> 2GB) cannot be displayed
- Fixed: [UPnP] Twonky prevents HDD from going into standby/sleep
- Fixed: [UPnP] TwonkyMedia server 5.1.4 crashes when scanning certain mp4 files
- Fixed: [DDNS] incorrect Recent DDNS Update Result if selecting www.no-ip.com as DDNS provider
- Fixed: [DDNS] continuous checking of external IP address every 5 minutes if selecting www.no-ip.com as DDNS provider

[Known Issues]
- (Surveillance Station) Y-CAM Generic V2 will be disconnected if selecting channel in Live View page.
- Synchronization option in 'Backup to External Drive' & 'USB One Touch Copy' is temporarily replaced by cp command because of the current known limitation of selected file size.

File Size

74MB

Download from

Firmware

Update date

2010/05/27

Version

3.2.7 Build0526

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]

v3.2.7 Build0526

[Checksum]

2825015429

[What's New?]

N/A

[Enhancement]

N/A

[Major Bug Fixes]

- Performance decrease 10% after network re-connect

- Fixed write cache will be disabled after restoring to factory default

- Fixed when an external share folder is set to hidden, user won't be able to see the files after enter the share folder

[Known Issues]

- (Surveillence Station) Y-CAM Generic V2 will be disconnected if selecting channel in Live View page.

- Synchronization option in 'Backup to External Drive' & 'USB One Touch Copy' is temporarily replaced by cp command because of the current known limitation of selected file size.

File Size

73.0 MB

Download from

Firmware

Update date

2010/04/29

Version

3.2.6 Build0427

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]

v3.2.6 Build0427

[Checksum]

TS-219: 3360418271

[What's New?]

- None

[Enhancements]

- Changes the default network port mode from fail-over to standalone for dual-LAN support

- Changes the default access right of external drives to admin user only with read & write access.

Other users now have DENY access by default.

[Major Bug Fixes]

- Fixed cannot connect to NAS if both NAS and client have Jumbo Frame enabled

- Fixed TS-410/410U's Surveillance Station missing Y-CAM model

- Fixed failed command line FTP via SSH if the file to be downloaded is larger than 2GB

- Fixed non-IE browser HTTPS upload failure of long file name in Web File Manager

- Fixed missing utility icons in Web File Manager if user with single folder permission pressed the refresh button

- Fixed display error of default shares in the disk usage section of Resource Monitor

- Fixed external eSATA hard drive support if it is larger than 2TB

[Known Issue]

- The quota setting in Time Machine cannot exceed 4TB

- (Surveillance Station) Y-CAM Generic V2 will be disconnected if selecting channel in Live View page.

- Synchronization option in 'Backup to External Drive' & 'USB One Touch Copy' is temporarily replaced by cp command because of the current known limitation of selected file size.

File Size

74.7MB

Download from

Firmware

Update date

2010/04/09

Version

3.2.5 Build0409

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]

v3.2.5 Build0409

[Checksum]

TS-219/219P: 2994181451

[What's New?]

- Upgrade kernel to 2.6.30.6 with EXT4 patch based on Linux kernel 2.6.31.12

- TwonkyMedia Server 5.1.4

- Support WD EARS hard drive series (4k sector hard drive)

Note: Must upgrade to v3.2.5 firmware or later versions, and then re-initialize the HDDs to adopt the WD Advanced Format Technology. Please refer to http://wiki.qnap.com/wiki/Complete_Reinitialization

[Enhancements]

- Support "Handle sparse files" option in Remote Replication

- Add Write Cache option for EXT4 in Hardware settings

- Upgrade stunnel (for HTTPS connection) from 4.15 to 4.32 for Web Administration

- [Spec change] E-mail address format to allow special characters such as % ' * / = ? ` |

- HTTPS file upload in Web File Manager now supports single file upload via Firefox, Chrome, and Safari

[Major Bug Fixes]

- Fixed EXT4 system stability issue

- Fixed HDD standby issue when TwonkyMedia Server is enabled

- Fixed DVD-structure folders causing TwonkyMedia Server 5.1.3 to crash

- Fixed disabling DST will cause time difference by 5-20 minutes in some regions

- Fixed incorrect DST start & end time in Pacific Time (GMT -08:00).

- Fixed incorrect message when setting time zone to Perth (GMT +08:00)

- Fixed NFS reads stall with EXT4 volume

- Fixed eSATA HDD mount issue after system reboot in ARM-based models

- Fixed USB HDD mount issue after system reboot

- Fixed failed destination path on remote server when Chinese user name was used

[Known Issue]

- (Surveillence Station) Live view does not work for D-LINK DCS6220

- (Surveillence Station) Y-CAM Generic V2 will be disconnected if selecting channel in Live View page.

- (Surveillence Station) No volume adjustment during playback under Windows XP SP2/IE6/WindowsMediaPlayer9

- Cannot connect to NAS if both NAS and client have Jumbo Frame enabled

- Synchronization option is temporarily replaced by cp command because of the current known limitation of selected file size. The fix will be available in the next release.

File Size

73.2 MB

Download from

Firmware

Update date

2010/03/18

Version

3.2.4 Build0315

Release Notes

[Version & Build]

v3.2.4 Build0315

[Checksum]

TS-219/219P: 1444787420

[What's New?]

- TwonkyMedia 5.1.3

[Enhancement]

- Change deafult bonjour service name for iTunes and Time Machine to avoid using the same service name on different service types.

* iTunes server: ServerName(iTunes)

* Time Machine: ServerName(TimeMachine)

- Speed up rsync compress performance

[Major Bug Fixing]

- System Configuration: Fixed abnormal system configuraiton file(s) recovered

- Security Update: The key and certificate files can be reached after importing SSL certificate and enable HTTPS connection

- Notification: System can't send email when using the SMTP server which doesn't require authentication

- DDNS: Can't use some specific characters in the username field

- Date and Time: Fixed the error pop-up message while applying the settings

- Port Trunking: Fixed the error pop-up message while applying the settings (Dual NIC model only)

- Port Trunking: The setting can't be applied when switching the mode from Balanc-alb to Fail Over (Dual NIC model only)

- SMSC: Fixed the error pop-up message while applying the settings, and the settings can't be applied

- Mac OS X: Fixed the wrong file size(268.4MB) when connecting to NAS shared folders

- UPnP Media Player: Fixed files can't be displayed in XBOX 360

- Fixed the compatibility issue with Hitachi 7K1000.B(HDT721010SLA360)

- Fixed enabling Jumbo Frame on both PC and NAS will cause NAS http browsing to fail

[Known Issues]

- HTTPS file upload in Web File Manager only supports Internet Explorer browser

- (Surveillence Station) Live view does not work for D-LINK DCS6220

- (Surveillence Station) Y-CAM Generic V2 will be disconnected if selecting channel in Live View page.

- (Surveillence Station) No volume adjustment during playback under Windows XP SP2/IE6/WindowsMediaPlayer9

- In some DST regions, disabling DST will cause time difference by 5-20 minutes

- Enabling UPnP Media Server will prevent HDDs entering standby mode

File Size

72.0 MB

Download from

Firmware

Update date

2010/02/13

Version

3.2.3 Build0212

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

- Remeber to clear the browser cache & cookies after firmware upgrade.

[Version & Build]

v3.2.3 Build0212

[Checksum]

1311694785

[What's New?]

- Using kernel 2.6.22.18 (ARM)

- Adjust read_ahead of RAID5 (TS-410,TS-419,TS-410U,TS-419U)

- Add "default gateway option" in network configuration

-Web File Manager 2

* Brand new user interface with best use experience

* Supports file compression (zip) /decompression (7z, gzip, gz, zip, bzip2, bz2, tar, rar, tgz)

* Supports file searching

* Supports drag-n-drop: moving file & folder within NAS

* Multiple files uploading /downloading

* Upload: up to 128 files at a time

* Download: auto-compress selected files into one zip file

-Apple Time Machine Support

-WebDAV Support

-DFS (Share Folder Aggregation)

-Cloud Storage Backup (Amazon S3)

-Real-time Function Search

-Import User List

-Language Support: Dutch & Czech

[Enhancement]

-Remote Replication Enhancement

*Displays task percentage and estimated remain time

*Manual start/stop for replication jobs

*Enhanced error log message

-Surveillance Station Enhancement

* Supports Windows 64-bit OS (XP, Vista)

* Supports Y-cam

-Date & Time Enhancement

* Customized datetime formate

* Daylight Saving Time (DST) support with customizable DST

-UPnP Media Server TwonkyMedia Server v5.1 (5.1.2)

-Password Strength Checker

-Support SNMP v3

-HTTPS for both Web Administration & Web Server

-Better NTFS External HDD Support (More stable and faster)

-Component Upgrade

* Samba: 3.3.9

* OpenSSL: 0.9.8e

* Apache: 2.2.14

* MySQL: 5.1.36

* PHP: 5.2.11

-Web Administration page layout can be remembered

-Provides the Write Cache option for EXT4

-PHP supports LDAP module

[Notice]

-[WebDAV] Ubuntu 9.04 or earlier versions might not be able to use WebDAV through GNOME. (works in 9.10)

[Major Bug Fixing]

-Fixes iSCSI processes in some situations may consume nearly 100% CPU resource and cause reboot or shutdown to fail

-Fixes copying using Windows Explorer may cause NAS system unstable in conjunction with EXT4 file system

-Fixed failed Remote Replication jobs and removed the progress indicator in Remote Replication

-Fixed rsync segmentation fault error in some cases

-Fixed failed synchronized backup jobs when backing up to external drives

-Fixed occasional instability issues with iSCSI target connections during the NAS boot process

-Fixed usernames with spaces can't login via Windows Networking (SAMBA)

-Fixed SNMP trap address error handling

-Can't join Windows AD if the password contains the special character !

-Users cannot authenticate using a Windows Server 2000 domain controller

-Update WINS configuration on Samba changes

-After changing the SSL port in web server, users cannot login via HTTPS.

-fter changing the web administration port and resetting the NAS via the reset button, users cannot login via HTTPS.

-(UPnP Media Server) In dual-lan setup, media receivers will appear twice

-Fixed RAID Capacity Expansion with 2TB hard drives

-Multimedia Station) Can't navigate to the other pages

-ixed FTP usernames in lower/upper case causing permission error

-Fixed playback issue in Surveillance Station under 64-bit Windows Vista and Windows 7

-Fixed permission issue if the new share name partially matches the exisiting shares

-Fixed Guest access right default settings on USB drives after system reboot

-Fixed enable UPnP media server causing hard disk not able to standby

-Fixed large file transfer via AFP under EXT4 causing the web admin page crash

File Size

75.9 MB

Download from

Firmware

Update date

2009/10/23

Version

3.1.2

Release Notes

[Version & Build]

v3.1.2 Build1014

[Enhancement]

- Disable NCQ to improve the RAID stability with some Western Digital hard drives (WD20EADS, WD15EADS, WD10EADS, WD2002FYPS, WD1002FBYS)

[Bugfix]

- With multiple volumes, the free volume size was incorrect when creating an iSCSI Target on volumes other than the 1st one

- Fix Finder can't connect to NAS normally in some situations

- Fix Pacific、Mountain、Central、and Eastern time zone settings that cannot be applied and overwritten.

- Update the time zone of Auckland, New Zealand

File Size

67,309

Download from

Firmware

Update date

2009/08/17

Version

3.1.1 Build0815

Release Notes

[Version & Build]
v3.1.1 Build0815

[Checksum]
TS-219: 1971273372

[Enhancement]
- Quick Search (user/group/share) supports fuzzy search
- Smart Fan based on system, HDD, & CPU temperatures
- Windows AD enhancement: now supports 100,000 domain users and groups with faster response time.
- Return to the login page after being inactive for 1 hour

[Bugfix]
- couldnot switch between normal login and SSL login
- domain user could not change password
- If one touch copy function failed, then the copy to external device function also failed
- SMTP Server,Sender and User Name could not accept "+"
- Web File Manager could not upload files to share in VDD share folders
- VDD share was not removed when formatting the VDD
- AD users did not have access right in FTP service
- When there are more than 100,000 AD users, quota could not be applied successfully
- If a user name contains '(' or ')', the access right can't be set in share folders
- When the administration port has been changed, remote access with port forwading will fail
- Created a private share with '&' character in create user function, the real folder would not be created
- Web File Manager security issue
- DHCP server could not be enabled on bonding type
- Edit user quota, the page would go to login page
- Persistent "Loading now, please wait" message in the notification page in some conditions
- "&" in the share folder or user names causing logout
- Quota did not work for domain users

File Size

66.0 MB

Download from

Firmware

Update date

2009/06/28

Version

3.1.0 Build0627

Release Notes

[Before Getting Started]

- It's highly suggested that you should back up all the data before applying this update.

- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]

v3.1.0 Build0627

[Checksum]

TS-219: 829084194

[What's new inside V3?]

- Brand New User Interface

- Virtual Disk

- EXT 4

- Network Service Discovery (UPnP & Bonjour)

- SNMP

- Support all 7 bonding (port trunking) modes for dual NICs models

- RAID Recovery (for 2-bay NAS or above)

- Bitmap Support (for 2-bay NAS or above)

For more information about V3, please visit: http://www.qnap.com/fw_v3/

[Update]

- Netatalk 2.0.4 (for Apple Filing Protocol)

- Rsync 3.0.6

- TwonkyMedia Server 4.4.17

File Size

65.8 MB

Download from

Firmware

Update date

2009/04/30

Version

3.0.0 Build 0430

Release Notes

[Before Getting Started]
- It's high suggested that you should back up all the data before applying this update.
- If you found the UI is incomplete/incorrect, please try to clear the browser's cache first and then refresh current page.

[Version & Build]
v3.0.0 Build0430

[Checksum]
TS-219: 2306087087

[Supported Languages]
English, Traditional Chinese, Simplified Chinese, Japanese, Korean, French, Spanish, German, Italian, Russian, Swedish, Danish, Finnish, Norwegian, and Polish.

[Supported Browsers]
- Internet Explorer 7
- Internet Explorer 8
- FireFox 3
- Safari 3.0
- Chrome BETA

[What's new?]
- Brand new User Interface design
- 2 login modes (Standard & Flow)
- Theme
- Network Service Discovery (UPnP & Bonjour)
- Flexible service links:
> You can choose to display/hide the Station(s) links in the login page on your own.
> When you disable the Station, its service link will be removed from the login page.
- Add "Remember Me" in the login window
- Separated view for Local & Domain users/groups
- Instant search in Users/Groups/Share Folders

[Enhancement]
- Twonky 4.4.14

[Known Issue]
- "Remember Me" does not work in Safari (for both Mac & Windows). This issue has been reported by many users on the internet saying that they have encountered this kind of issue while using Safari to surf the websites. However, we will still keep trying to find out the solution for this.

File Size

71.5 MB

Download from

Firmware

Update date

2009/04/08

Version

2.1.4 Build 0317

Release Notes

[What is new?]

- Support bitmap in RAID1 (solving the issue of rebuild time)

- PHP 5.2.9

[Enhancement]

- Add Apache httpd modules: rewrite, vhost-alias, webdav, expires, headers...

* use phpinfo to get all module list

- Remove "ftp write only" log message in SAMBA

- Improve RAID5/RAID6 performance

- Security patch in SAMBA

* http://www.samba.org/samba/security/CVE-2008-4314.html

* http://www.samba.org/samba/security/CVE-2009-0022.html

- FTP performance enhancement when transfering small size files

- Upgrade iSCSI target (Enterprise iSCSI) from 0.4.16 to 0.4.17

[BugFix]

- [Log] Correct connection log related to usb/esata disk access

- [Surveillance Station] Linksys space estimation fixed in Surveillance Station

- [UPS] Unplug UPS might cause

- [Log] No log when setting iTunes passwd

- [Timezone] Zonefile incorrect caused by Surveillance Station

- [Timezone] Update zoneinfo file (/etc/zoneinfo/Australia/Perth)

* According to DST rules in Australia http://forum.qnap.com/viewtopic.php?p=39988#p39988

- [Mac OS] Creating directory under Mac OS X 10.5 might cause the accessing problem.

- When e-mail alert is enabled, the auto IP blocking event will cause CPU load to almost 100%

- Formatting external disk will stop iSCSI target service

- IE7 javascript error in TCP/IP page

- IE7 javascript error in SSL Certificate import page

- [iSCSI] iSCSI IQN is case insensitive

- [iSCSI] Fix the LUN issue which will caused the volumes can't be recognized correctly in VMware ESX

- [UPS] Fix UPS plug-in will replace usbhid to usbfs driver

- [UPS] HDD standby issue caused by UPS

- AD user name contains space character

- AD workgroup/domain issue

- [NFS] NFS mount/umount logs

- [DDNS] DDNS will prevent the HDD from spinning down if the "check external IP" option is enabled.

- Restart services after unlock&mount encrypted volume

- USB copy can't work after init system

File Size

67.6 MB

Download from

Firmware

Update date

2009/03/23

Version

2.1.3 Build 0304

Release Notes

Please unzip and execute this file.

TS-219_2.1.3_Build_0304.zip

File Size

69.3 MB

Download from


\| Home \| About QNAP \| Privacy Policy \| Terms of Use \| Contact us \| Site Map \|
Asia - Taiwan QNAP Systems, Inc. TEL: +886-2-8698 2000 FAX: +886-2-8698 2270
Copyright ©2010; QNAP Systems, Inc. All Rights Reserved. This site is best viewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+